Search

 
Welcome to the Software Bisque Knowledge Base.  Use this resource to locate solutions to many common software and hardware issues. 

 

1. Enter Search:    

Enter a word, phrase or article number; only exact matches will be found. Wildcards (characters such as ', * or |) are not accepted.

Example Search Text (without the quotes): 

"Q34KB"

"Application fails to launch"

"error reading file"

 

2. Submit Query:
3. View results below


Article ID: Q2KB

Problem: Guide To Appears to be Off in RA

Category

 

Telescope Interface

 

Description

 

When using the Guide To to find an object, it appears as though the end result is off in RA, and declination is OK.

 

Solution

 

When using the GuideTo with a telescope link, be sure to complete the RA axis first, and do it relatively quickly. Once the RA is complete and the telescope RA clutch is locked down, the scope can then track in the RA axis and time is no longer a factor. The RA coordinate is not continually recalculated as the destination coordinate during a GuideTo. Therefore, as time goes by, the RA destination coordinate becomes increasingly off. For example, if one minute of time goes by before someone finally finishes the RA axis in the GuideTo and looks into the eyepiece, that equates to being off one minute of RA. One minute of RA is 15 arc-minutes (degrees vs. hours). On a 30 minute FOV, this may put the object outside the eyepiece.

 


Article ID: Q34KB

Problem: Win32s Auto Recompute Has Wrong Time

Category

 

General

 

Description

 

When the stellar or planetary recompute interval has elapsed, the recompute uses uninitialized time and the screen is redrawn at an incorrect time relative to the previous time.

 

Solution

 

This is a known problem with TheSky Level IV only. The problem was fixed in version 4.00.001. Customer should obtain an update from our Web site or BBS (see Help, About TheSky for information). If necessary, we can mail an update.

 


Article ID: Q43KB

Problem: Minimizing TheSky while linked to a telescope

Category

 

Telescope Interface

 

Description

 

When connected to a telescope and the main window is minimized, TheSky causes a general protection fault after about three seconds.

 

Solution

 

Minimizing TheSky while linked to a telescope causes TheSky v 2.1x to GP fault. The latest version of 2.11 (03/13/96) fixes this problem. The latest version is on the BBS as WS.ZIP and on our Internet website.

 


Article ID: Q43KB

Problem: Minimizing TheSky while linked to a telescope

Category

 

Telescope Interface

 

Description

 

When connected to a telescope and the main window is minimized, TheSky causes a general protection fault after about three seconds.

 

Solution

 

(Symantec Norton Utilities/WinDoctor users should see the special note below.) FIND THE DLL FILE Check the location of the indicated .DLL file on the system. Here's how: 1. Right-click on the Start button and choose Find. 2. Enter the name of the indicated .DLL file into the Named field. 3. Set the Look In location to be your C: drive (or Local Hard Drives, if available). 4. Be sure the Include Subfolders option is checked. 5. Click the Find Now button. The location(s) of the file will be displayed in the lower portion of the Find window. The shared and common files for Software Bisque's 32-bit applications are placed in the C:\Program Files\Common Files\System folder (for Windows 95/98/NT). If more than one occurrence of the file is found, then it is likely that an incorrect one is interfering with the application's operation. In this case, rename or delete (to the recycle bin) any such files not found in the just-named folder, and start the application again. If the file is on the system, then Windows is not including its location in its search when the application requests it. This can be solved in one of three ways: 1. Uninstall the affected application and re-install it. (May not work for Windows NT 4.) -or- 2. (Windows NT users only) Add the location found in the above "FIND THE DLL FILE" procedure to the Path system variable. To do so, choose Start / Settings / Control Panel / System and edit the "Path" system variable found in the Environment tab sheet. A semi-colon (";") should be placed between multiple definitions (e.g. "C:\Windows;C:\Program Files\Common Files\System"). -or- 3. Add the location found in the above "FIND THE DLL FILE" procedure to the application's Path setting in the Registry. Follow the "EDITING THE APPLICATION'S PATH SETTING" procedure below. ---------- NORTON UTILITIES USERS: Symantec's WinDoctor utility has been found to remove some of the registry entries for Software Bisque's applications. This renders them inoperable. Symantec has informed us that they intend to correct this in a future release of WinDoctor, but in the meantime, here are two solutions: 1. Disable Norton Utilities. 2. Uninstall the affected application and re-install it. --Or-- EDITING THE APPLICATION'S PATH SETTING 1. If running, close the affected application (e.g. TheSky). 2. Open the Registry Editor (Start / Run, type REGEDIT, then select OK). 3. Switch to the HKEY_LOCAL_MACHINE window (listed under Window menu). 4. Open the key list (in the left-hand side of the Registry window) to Software\Microsoft\Windows\Current Version\App Paths. 5. Select the affected application's key (e.g. Sky.exe) from the key list. 6. Look in the value list (in the right-hand side of the Registry window) for a value named "(Default)". If it isn't present, add a string value (Edit, New, String Value) and change its name to "(Default)" - without the quotes. 7. Select the "(Default)" value from the value list, and set its data (Edit, Modify) to the location of the related executable file (e.g. Sky.exe). For TheSky, if the default location was used during installation, this should be: "C:\Program Files\Software Bisque\TheSky" 8. Look in the value list for a value named "Path". If it isn't present, add a string value (Edit, New, String Value) and change its name to "Path" - without the quotes. 9. Select the "Path" value from the value list, and set its data (Edit, Modify) to the same location given in Step 7 above, plus that of the indicated .DLL file. For TheSky, if the default location was used during installation, this should be: "C:\Program Files\Software Bisque\TheSky;C:\Program Files\Common Files\System" 10. Exit the Registry Editor (Registry, Exit) and your changes will automatically be saved. You should now be able to start the application successfully. As a LAST-DITCH EFFORT only, the application's .DLL files could be copied directly into that application's folder, however this is not recommended, as it may wreak havoc on future upgrades. >>>>>>>>>>>>>>> From Symantec Support: "Do you set the '(Default)' value of the appropriate App Paths key? If not, then it is considered not valid and WinDoctor (as its default solution) removes the whole key . This obviously removes the 'Path' value within the key and would then stop your programs from finding their DLLs. WinDoctor's solution to the problem is a bit heavy handed. I will add this as an item to be changed in the next version." Symantec / Norton Utilities Development

 


Article ID: Q44KB

Problem: TheSky version 4.0 and OS/2 Warp

Category

 

General

 

Description

 

Does TheSky version 4.0 run under OS/2 Warp?

 

Solution

 

TheSky Version 4 does not yet run under OS/2 Warp because OS/2 does not yet support Win32s Version 1.3 which TheSky requires.

 

[1/58]