Software Bisque Knowledge Base Article – 244

FILTER WHEEL TOOLBAR DOESN’T MATCH FILTERS

ISSUE

The button colors for CCDSoft’s Filter Wheel Toolbar don’t match those of the filters.

RESOLUTION

The user must create a new DWORD value in the Registry called “Toolbar” (this need only be done once), and set it to the desired value. Here’s how:

1. Close CCDSoft, if currently running.
2. Open the Registry Editor (Start / Run, type REGEDIT, then select OK).
3. Expand the HKEY_CURRENT_USER heading appearing in the list on the left side of the Registry Editor’s window.
4. Navigate through this list to Software, Software Bisque, CCDSoft, and then select the category Color Filter Wheel.
5. From the Edit menu, choose New, DWORD Value.
6. Rename New Value #1 as Toolbar.
7. Choose OK, or press Enter to accept the value name.
8. Double-click the value name (or its icon) to bring up the Edit DWORD Value dialog.
9. Set the Value Data to 0 (zero) for the standard toolbar, or 1 to match a PixCel 255/ST-5C filter wheel.
10. Choose OK. To leave the Registry, simply exit – your changes are already saved.

Refer to Appendix A of the CCDSoft manual for information on other Registry settings.

APPLIES TO

Installation

KEYWORDS

SBKB

This article was formerly published under the identifier Q481KB in Software Bisque’s prior knowledge base.

Last Reviewed: 11/24/2004